Vaping has become a popular pastime in the Philippines, captivating both seasoned users and newcomers alike. While pre-made coils are readily available in the market, creating your own loop coil can significantly enhance your vaping experience. This guide will walk you through the process of making a loop coil for your vape, offering a blend of practicality and creativity.
Understanding Loop Coils
Loop coils, known for their excellent heat distribution and flavor production, are ideal for those who wish to customize their vaping experience. Unlike standard coils, loop coils allow for multiple wraps and can be tailored to fit various vaping styles, whether you prefer clouds or flavor.
Materials You Will Need
Before diving into the creation process, ensure you have the following materials handy:
- Kanthal or stainless steel wire (24-28 gauge)
- Coil jig or screwdriver
- Wire cutters
- Flathead screwdriver or tweezers
- Ohm meter (for resistance checking)
- Safety gloves (optional)
Step-by-Step Guide to Creating a Loop Coil
1. Prepare the Wire: Cut a length of wire approximately 6-8 inches long. This length will give you enough material to create a loop coil with multiple wraps.
2. Create the Loop: Using a coil jig or screwdriver, start wrapping the wire around the rod. Aim for 5-7 wraps, depending on your desired resistance and flavor profile. Ensure the wraps are tight and evenly spaced to achieve optimal performance.
3. Forming the Legs: Once you’ve created the coil, cut the wire about an inch away from the last wrap. Bend the ends of the wire (the legs) outwards, which will later connect to the deck of your vape.
4. Install the Coil: Carefully insert the coil into the posts of your atomizer. Make sure the coil sits above the deck and is centered for even heat distribution. Tighten the screws to secure the coil in place.
5. Check the Resistance: Using an ohm meter, check the resistance of your coil to ensure safety. Ensure that your vape device can handle the resistance level you’ve created.
6. Wicking: Cut a piece of cotton wick and thread it through the coil. Trim the ends so that they reach the juice well of your atomizer. This will help absorb e-liquid and improve your vaping experience.
7. Prime the Coil: Before firing up the coil, saturate the cotton with e-liquid to avoid dry hits. This step is crucial for ensuring a smooth and flavorful vaping experience.
Conclusion
Making your own loop coil can be a rewarding experience, allowing you to customize your vaping setup to your preferences. With practice, you’ll be able to create coils that enhance both the flavor and vapor production. As the vaping community continues to grow in the Philippines, mastering coil building will certainly set you apart. Take your time, prioritize safety, and enjoy the journey of becoming a skilled vaper!
Add comment